Fluid Mechanics Lab Equipments

Product Price :Get Latest Price

• Kaplan Turbine is an axial flow reaction turbine named in honour of Dr. B. Kaplan, a German Engineer.
• This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the discharge (Q) must increase to produce the same power.
• The present set-up consists of a scroll casing housing a runner.
• Water enters the turbine through the stationary guide vanes and passes through the runner axially.
• The runner has a hub and airfoil vanes,which are mounted on it . The water is fed to the turbine by means of Centrifugal Pump.
• The runner is directly mounted on one end of a central shaft and other end is connected to a brake arrangement.
• A transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes.
• This runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of drum brake arrangement so that the efficiency of the turbine can be calculated.
• The set-up is supplied with control panel.
• Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

• To study the operation of Kaplan turbine
• To determine the Output Power of Kaplan Turbine
• To determine the turbine efficiency

• Electricity Supply: Three phase, 420 VAC, 50 Hz, 32 Amp. 4 Pole MCB with earth connection.
• Water supply (Initial Fill)
• Floor Drain Required.
• Floor Area required: 3.5 x 1.5 m
• Tachometer to measure RPM
• Mercury for Manometer (250gms)

• Water Circulation: Centrifugal Pump, CRI/Standard, Make, Capacity 5 HP, 3 Phase
• Discharge Measurement: Pitot Tube with Manometer
• Sump Tank: Capacity 200 Ltrs
• Pressure Measurement: Pressure Gauge & Vacuum Gauge
• Piping & Fittings: Pipes & fittings with flow control valves of suitable size
• Control Panel Comprises of: L&;T make Starter, Mains Indicator,MCB for overload protection.
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
• Tanks will be made of Stainless Steel
• The whole set-up is well designed and arranged in a good quality painted structure

Product Price :Get Latest Price

• To verify Bernoulli's Theorem experimentally

• Electric supply 0.5 kW, 220V AC, Single Phase
• Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
• Floor Area with Drain facility

Product Price :Get Latest Price

• To determine the co-efficient of discharge of different Orifice and mouthpiece

• Electric supply 0.5 kW, 220V AC, Single Phase
• Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
• Floor Area with Drain facility

Product Price :Get Latest Price

Product Price :Get Latest Price

• The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required notch is fitted at one end of this channel. A pointer gauge with vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i. e. Rectangular notch, 60 V notch & 45 V notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.

Product Price :Get Latest Price

Additional Information:

• Item Code: ALE109

Product Price :Get Latest Price

Desiccator complete with Desiccator Plate (Plastic/Glass)

Sizes:

• 150mm dia. Non Vacuum 200mm dia. Non Vacuum 250mm dia. Non Vacuum 300 mm dia. Non Vacuum 150 mm dia. Vacuum 200mm dia. Vacuum 250mm dia. Vacuum 300 mm dia. Vacuum

Additional Information:

• Item Code: PL-185

Product Price :Get Latest Price

• A Pitot tube is used to measure the local velocity at a given point in the flow stress. A Pitot tube of standard design made of copper/Stainless Steel is supplied and is fixed below a vernier scale. The vernier scale is capable to measure the position of Pitot tube in transparent pipe section. The pipe has a flow control valve to regulate the flow.

Product Price :Get Latest Price

We deal in complete lab set up for ANM , GNM , BSc Nursing College as per INC ( Indian Nursing Council). Including all the labs of ANm, GNM , & Bsc Nursing namely Fundamental Nursing -Laboratory, Midwifery & Child Health Laboratory , Nutrition Laboratory , Community Health Laboratory , Anatomy and Physiology Laboratory , A.V Aids. These manikins are used in most of Hospital and Nursing Institutes of India. These manikins are approved by Nursing Council of India. We have all type of widely demanded instrument and manikins in hospitals, these quality grade models are highly beneficial in depicting child birth demonstration, female genital organs, foetal skull, human female pelvis and other important parts of the female body. The offered models are vastly recognized for their clear depiction and long lasting finishing. We have a wide and well functional infrastructural unit that is situated at Ambala Cantt (Haryana, India) and helps us in making a remarkable collection of products as per the set industry standards

Additional Information:

• Item Code: OPT251