Heating Mantels And Hot Plates

Product Price :Get Latest Price

We are devoted towards offering the qualitative range of Biosafety Cabinet, as per client’s precise need and requirements.

• The Bio safety cabinet is fitted with a pressure sensor to detect pressure drop across the supply filter.
• Front of the cabinet shall be angled to help minimize glare
• Fluorescent lamps for lighting of the interior of the cabinet
• UV light is also fitted to disinfect the interior of the cabinet. UV light shall be programmable to allow for specific exposure time from 0 to 24 hrs.
• Automatic UV switch =OFF‘ on opening of front window. The front window is made of laminated safety glass to protect against leakage of UV rays and to ensure containment of potentially hazardous material
• Safety alarm/safety display for low air velocity and faulty exhaust fan
• Movable stands

• The system is microprocessor based. The microprocessor displays the inflow and down flow air velocities in real time on an LCD display.
• Motor automatically adjust the air flow speed to ensure continuous safe working condition. Air flow as per requirements of Bio safety regulations in respect of at least BSC II A level cabinet.

Product Price :Get Latest Price

• Francis Turbine is a reaction turbine, which was developed by an English born American Engineer Sir J. B. Francis.
• The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine.
• As the water flows to the runner, a part of pressure energy goes on changing into kinetic energy.
• Thus the water through the runner is under pressure.
• The runner is completely enclosed in an air tight casing and the casing & runner is always full of water.
• The present set-up consists of a runner. The water is fed to the turbine by means of Centrifugal Pump, radially to the runner.
• The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement.
• The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the runner.
• This runner assembly is supported by thick cast iron pedestal.Load is applied to the turbine with the help of brake arrangement so that the efficiency of the turbine can be calculated.
• A draught tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

• To study the operation of a Francis Turbine.
• To determine the Output Power of Francis Turbine.
• To determine the Turbine Efficiency

• Water Supply and Drain.
• Electricity 5 kW, 440V AC, Three Phase.
• Floor Area 2 x 1 m.

• Runner: Having Curved Vanes
• Dynamometer: Rope Brake type
• Sump Tank: Capacity 200 Ltrs
• Water Circulation: Centrifugal Pump, Standard Make, Capacity 5 HP Three Phase.
• Discharge Measurement: Pitot Tube with Manometer
• Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus

Product Price :Get Latest Price

Body fabricated out of single piece aluminium and logged with special mineral wool. Provided with ON/OFF switch, pilot lamp, energy control knob etc. Provided with jointless hand knitted glass yarn capable of with standing high temperature upto 400^o C. Work on 220 VAC.

Additional Information:

• Item Code: PL-165